Paint manufacturing equipment: information & news

oliver batlle blog ing

In Oliver + Batlle we are specialists in the design of equipment and integral solutions for paint manufacturers. We have created this section in our website where we want to provide relevant and quality information about paint manufacturing equipment.

Innovation, new technologies and environmental sustainability are the three main lines that guide the development and evolution of production systems. In this sense, through our blog we want to echo all those news, innovations and trends that occur in our sector.

We invite you to participate through the comments enabled in each article, contributing with your opinion or sharing with our community any doubts, consultations or releases of interest about anything.

Read all our Oliver+Batlle blog articles below.

Oliver + Batlle will participate in Eurocoat 2026 in Paris

From March 24 to 26, Oliver+Batlle will be present at Eurocoat 2026, the leading event in France for professionals in the paint, ink, varnish, adhesive, and coating industries. The fair, held in Paris, brings together manufacturers, formulators,…
, ,

Revolution in paint dosing: Why the future is additive (3D)

In the paints and coatings industry, efficiency is not just a goal; it is a competitive necessity. However, many production lines are still held back by conventional dosing technologies that create bottlenecks, product waste, and high maintenance…
, ,

Industrial disperser for increasing production capacity

Challenge: Increase production capacity without expanding facilities, working with variable batches of varnishes and water-based and solvent-based paints. Solution: Polimix DPS-5000-TRC ATEX disperser. Result: Significant increase in production…
, ,

Equipment for the Manufacturing of Emulsion Paints and Coatings

Company overview Duracolor Coatings, S.L.U. is a family-owned company dedicated to the manufacture of a wide range of coatings, both water-based and solvent-based, including emulsion paints, exterior coatings, primers, enamels, varnishes…
, , , ,

Manufacturing and Filling of Solvent-Based Industrial Paint

Introduction A leading company in the industrial paints and coatings sector undertook a strategic project aimed at optimising its manufacturing and filling processes for solvent-based industrial paint. The objective was to implement a highly…
, , ,

Case study PINTURAS MONTÓ – Continuous production and automated filling of decorative paint

1. Company Overview Founded in 1961, Pinturas Montó began its activity in Valencia producing vegetable glues and traditional tempera paints. Over the years, it evolved into the manufacture of decorative plastic paints, becoming a benchmark…
,

Key Factors in the Manufacturing of Phytosanitary Products as Aqueous Suspensions

The evolution from powder formulations to aqueous suspensions (flows) has represented an important advancement in phytosanitary product manufacturing, offering benefits in safety, dosing, and the distribution of active ingredients. This evolution…
,

Paint Pilot Plant: A Tailored Engineering Solution for Hempel

What characterises Hempel and its activity in the coatings industry? Hempel is a multinational manufacturer of paints and coatings headquartered in Denmark, specialising in solutions for industrial, marine and protective coating applications.…
,

Insights on basket milling

Immersion Milling: A technical guide to optimizing coating efficiency  Immersion grinding is a pigment dispersion and milling process that uses a circular basket mill submerged directly into the product. Unlike horizontal grinding systems,…
,

Optimizing immersion grinding: Key takeaways from the Webinar “Basket Mills: Tailoring Accessories and Configurations for Maximum Performance”

At Oliver + Batlle, our commitment to technical innovation and process excellence in the manufacturing of paints and coatings is constant. We recently hosted a technical webinar titled "Basket Mills: Tailoring Accessories and Configurations…
acabado de pinturas, paint finishing
,

The paint finishing stage in the manufacturing process

What does the paint finishing phase involve in the manufacturing process? The paint finishing phase is one of the final stages of the manufacturing process before filtration and packaging. Following the dispersion and grinding stages, the…
, , ,

New water-based coating manufacturing and filling plant: Process optimization at EUROTEX

EUROTEX: Manufacturing and marketing of industrial and decorative paints, and waterproofing products EUROTEX began its business activity in the early 1980s as a specialized paint store in Mairena del Alcor, Seville. In 1987, aimed at gaining…

Oliver+Batlle, PAINT MANUFACTURING EQUIPMENT SPECIALISTS

In Oliver + Batlle we work to offer the best solutions in paint manufacturing equipment. Our services: technical service, sale of components or our test laboratory for the manufacturing equipment, allow us to maintain a direct and constant contact with our clients. Thanks to this, we are able to design equipment  adapted to each manufacturer specific needs.

With over 60 years of experience in the sector and our know-how, we are in O+B at the forefront of creating solutions and manufacturing equipment for the paint production. Our mixing equipment, grinding machines, filling equipment, accessories and other solutions for the paint industry are constantly updated. We introduce new features looking for the excellence in performance and optimization of the productive work of our customers.

In this section we want to share all the news, updates and information about paint production equipment,  clarifying doubts and providing knowledge and valuable information to the sector.

contact